Replibit - How to turn on Replibit Remote Assist

Replibit Remote Assist allows a Replibit technician to access your appliance through a secure SSH connection to assist with troubleshooting and resolution of certain problems.

To Turn on the Replibit Remote Assist, please following the instructions below:

1. Go to the Appliance / Vault. Chose the Settings Menu. 
2. Click the Enable checkbox to enable a technician to access your appliance.
3. Look at the expiration date in the Expiration field, and change the date if you would like it to be shorter or longer than the default date based on your needs. We recommend turning on remote assist for at least 2 weeks to ensure sufficient time to diagnose & resolve issues.
4. Click the Save button. 

When you click Save, you will see the System ID below the Save button. Be sure to include the System ID in the support ticket that you open, so we can uniquely identify this system and automatically get the remote assist IP and port.

 5. Remote assist must also be turned on within your Global Management Portal (GMP). Proceed to the Global Management Portal (GMP)| Settings | Remote Assist

6. Check the Enable checkbox.
7. Look at the expiration date in the Expiration field, and change the date if you would like it to be shorter or longer than the default date based on your needs.
8. Click the Save button.
9. If you did not have a System ID in step 5, then you additionally have to gather the remote assist IP address and port information manually. Proceed to the GMP (Global Management Portal) | Managed Systems

Capture the System Name, IP Address, Management Port, and Customer information field contents from the GMP, and reply to the ticket with this information.